BCKBT - RED DEVIL SILICONE

  • MSDS: BCKBT
  • Manufacturer: RED DEVIL INC
  • Product Name: RED DEVIL SILICONE
  • National Stock Number: 8030-00N003471
Product Identification

Product ID:RED DEVIL SILICONE
MSDS Date:01/01/1985
FSC:8030
NIIN:00N003471
MSDS Number: BCKBT

Responsible Party
RED DEVIL,INC.

Emergency Phone: 918-825-5744

Cage: HO115

Contractor
RED DEVIL,INC.
A PRYOR, OK 74361 US

Telephone: 918-825-5744

Cage: HO115

Ingredients

DEMETHYLSILOXANE

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 87%


ACETOXYLSILANE

Fraction By Weight: 4.23%


SILICON DIOXIDE

RTECS: VV7320000

Fraction By Weight: 8.68%


DIBUTYLDIACETOXYSTANNANE

CAS: 1067-33-0

RTECS: WH6880000

Fraction By Weight: 0.02%

ACGIH TLV: 0.1 MG/CUM (MFR

Hazards

Effects of Overexposure:IRRITATING TO THE EYES,SKIN AND UPPER
RESPIRATORY TRACT. WITH EXTEND EXPOSURE.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT A PHYSCIAN. SKIN:
WASH WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR,GIVE
ARTIF RESP IF NEEDED,CONSULT PHYSICIAN. INGESTION: CONSULT A
PHYSICIAN.

Fire Fighting

Flash Point:464F/240C (CC)
Extinguishing Media:SAND,WATER,FOAM,DRY CHEMICAL,CO*2.
Fire Fighting Procedures:SELF-CONT BREATH APP AND PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:IF NOT CURED,USE AN ABSORBENT MATERIAL SUCH AS
SAWDUST,SAND OR DIATOMACEOUS EARTH. PLACE IN APPROPRIATELY MARKED
CONTAINERS.

Handling

Handling and Storage Precautions:AVOID HEAT AND MOISTURE
Other Precautions:STABLE UP TO 12 MONTHS IN CLOSED CONTAINERS AT
TEMPERATURES UP TO 80F/26C.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:PROTECTIVE GOGGLES
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.04
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE-WITH ODOR LIKE ACETIC ACID.

Stability

Stability Indicator/Materials to Avoid:YES
IRON
Conditions to Avoid Polymerization:MOISTURE AND HEAT

Disposal

Waste Disposal Methods:FULLY CURED MATERIAL MAY BE STORED IN DUMPS.
CURED WASTE MATERIALS MAY BE INCINERATED UNDER CONDITIONS WHICH
MEET FEDERAL,STATE & LOCAL ENVIROMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.